Five modules in total were fabricated, of maximum Width / Height 800mm, and of Lengths from 900 to 1550mm. Three of the planters were stepped, to create a change in Height along the run of the planter; and one of the planters incorporated a cylindrical cowl to isolate an air vent passing through the base of the planter. The planter modules were manufactured from 1.5mm Zintec steel, polyester powder coated to RAL 7032 [Pebble grey]; and a further planter L 2100 x W 550 x H 550mm in RAL 7015 [Slate grey] was supplied for a small paved area at the front of the house.
View ProjectContact IOTA T. 01934 522617